The Lookah Seahorse has become a favorite among concentrate enthusiasts due to its portability, ease of use, and powerful performance. If you’re new to this device or dab pens in general, this beginner’s guide will walk you through how to use a lookah seahorse step-by-step, helping you get the most out of your vaping experience.
What You Need to Know Before Starting
The Lookah Seahorse is an electric nectar collector designed primarily for concentrates like wax or oil. Unlike traditional dab rigs, it offers a convenient, battery-powered alternative that heats up quickly and delivers smooth vapor. Before using your Seahorse, ensure it is fully charged and you have quality concentrates ready.
Step 1: Charge Your Lookah Seahorse
Most Lookah Seahorse models come with a rechargeable battery and USB charging cable. Fully charge your device before first use to optimize battery health. Simply connect the charging cable to the port on the device and plug it into a USB power source. Charging typically takes about 1 to 2 hours depending on the model.
Step 2: Prepare Your Concentrate
Using a dab tool, place a small amount of concentrate onto a clean surface or dab dish. Start with a small dab to avoid wasting product and to get comfortable with the device’s heat output.
Step 3: Power On the Device
Turn on your Lookah Seahorse by pressing the power button five times quickly (this is a common safety feature to prevent accidental activation). Once powered on, the device will begin heating the ceramic coil inside.
Step 4: Heat the Coil
Press and hold the power button to activate the heating element. The ceramic coil will heat rapidly, usually within 10 to 15 seconds. Some models have adjustable temperature settings, so you can select your preferred heat level by clicking the button additional times or cycling through modes.
Step 5: Start Dabbing
Once the coil is hot, use the tip of the device to gently touch the concentrate. The heat will vaporize the wax or oil instantly. Inhale slowly and steadily through the mouthpiece as you do this. Avoid pressing too hard to prevent clogging or damaging the coil.
Step 6: Control Your Draw
Take slow, controlled draws to enjoy smooth vapor and avoid coughing. Remember, less is often more with concentrates, especially when starting out.
Step 7: Turn Off the Device
After your session, turn off the Seahorse by clicking the power button five times quickly. This ensures safety and helps preserve battery life.
Tips for Beginners
- Start with Low Temperature: If your Seahorse has temperature controls, begin with a lower heat setting to avoid harsh hits.
- Clean Regularly: Residue buildup affects flavor and device performance. Clean your Seahorse after every few uses for the best experience.
- Use Quality Concentrates: Higher-quality wax or oils produce better vapor and are easier on your device.
- Avoid Overloading: Use small amounts of concentrate per dab to prevent clogging and uneven heating.
- Practice Safety: Never leave the device heating unattended and keep it out of reach of children.
Troubleshooting Common Issues
- No Vapor or Weak Hits: Check battery charge and clean the coil if residue has built up.
- Burnt Taste: Often means the coil needs cleaning or replacement.
- Device Not Turning On: Ensure it’s fully charged and the power button sequence is correct.
Final Thoughts on Using Your Lookah Seahorse
Using a Lookah Seahorse is intuitive and rewarding once you understand the basics. Its quick heat-up, portability, and efficiency make it an excellent choice for concentrate vaping beginners and veterans alike. Follow this guide, practice responsible use, and you’ll be enjoying smooth, flavorful hits in no time.
Leave a Reply