- Temporary place the extender along with the router.
- Find and push the WPS button of the router first.
- And after few seconds press the WPS button of the extender.
- A light is starting blink on the Brostrend extender.
- Here you need to wait till the light is turn into solid color.
Then move the extender to a location where the router’s signal cannot reach. In this method extender inherit all the custom settings of the router.
Through Web Manager
Sometime the router does not support the WPS button; in this case, you will need to connect an Ethernet cable to connect Brostrend extender to Linksys router. Steps are:
- First of all attach the computer with router via cable or wirelessly./li>
- Then you need to use the browser to reach out the 192.168.0.254 interface.
- Type this IP address into the search bar of the browser.
- Enter login detail and reach out the web interface of the Brostrend extender.
- Then select the network name or SSID of the router which you want to extender and also provide their password.
This way, you can configure the Brostrend router with help of web browser. On this interface, you can also manage several settings of the extender.
Conclusion
I hope this guide was helpful to connect Brostrend extender to Linksys router. Here we provide the easy steps to setup. If you have any doubt, then contact to our customer support.
